Ongoing Project R&D - DHI

Drone Application For Power Utilities

Innovation systems and technology are of great importance and significantly contribute to socio-economic development and nation building. Recognizing this, DHI Innotech aims to pursue research, develop ventures, and build national competency in the field of science and technology. Towards that end, Innotech has collaborated with Bhutan Power Corporation (BPC) Limited to implement a pilot project that utilizes drones for power maintenance and operation.

Drone Application Power Maintenance and Operation


A Memorandum of Understanding (MoU) was signed on 1st January 2021 between DHI and BPC to launched the drone project. Once developed, the drone applications will carry out infrastructure inspection for BPC. Power line inspection is the first activity in the maintenance cycle. Its effectiveness is important in determining the power system reliability and the maintenance costs of the electrical system.


As underscored in the MoU, the project strives to help both parties gain familiarity with drone technology. This will enhance confidence and gain momentum to invest in other drone projects. Further, DHI will analyse and evaluation financial and technical feasibility for usage of drones in the aforementioned use case.

Read More

Smart Bin Solution


Smart Bin is a battery powered trash compactor that reads a waste bin’s fill-level in real-time, compresses the accumulated waste, and notifies waste collectors when filled to capacity.


Overview of Issues

Waste collection and management is critical to any city. Traditionally, garbage trucks take rounds around Thimphu to collect waste from different areas. Delayed trucks and excess garbage causes bins to overflow, pollutes the area and attracts pathogens. This severely impacts public health. Smart Bin aims to tackle these problems by introducing a compression technology right at the source of the trash. 

About Smart Bin


Smart Bin is a trash compactor that uses battery power. It reads a waste bin’s fill-level in real-time using an ultrasonic sensor that triggers automatic waste compaction. This will effectively increases the bin’s capacity by up to 3-8 times, and reduce collection frequency by up to 80%. Once the bin is full, the bin sends a text to a given number along with the location of the bin. The bins will be a WiFi supported module and will send a signal to a central system in the future. This will then route the most efficient collection route.


Future Plans

The Smart Bin pilot project will be tested in certain key areas in partnership with Innotech. Once they have feedback from the pilot project, the product will be refined for commercialization. Features will be added to the MVP over time, including automatic segregation and disinfection using UV light.

Read More

Phuentsholing Township Development Project (PTDP)

Phuentsholing Township Development Project (PTDP) is undertaken primarily to protect the existing Phuentsholing town from seasonal flood and erosion and to reclaim vacant riparian land popularly known as “Toorsa.” 

 

The development work in PTDP includes construction of river protection walls and common urban infrastructure. On completion, 156 acres of extra land will be added providing the much-needed respite for the demand for space for expansion and growth of Phuentsholing, the commercial hub of the Country.


The adequacy of infrastructure in Phuentsholing is seen as critical to support the overall development of the Country. The project cost is estimated at USD 93 million.

Asian Development Bank (ADB) is providing a financing of USD 81.5 million in the form of grants and loans and Druk Holding and Investments Ltd. (DHI) is injecting USD11.5 million.

 

Construction Development Corporation Ltd. (CDCL) is implementing agency and has engaged Ms. AFCONS Infrastructure Ltd., Mumbai, India as the contractor for river training and embankment works at Nu. 2.93 billion. The work is expected to complete by June 2022. The contract for common urban infrastructure works is expected to commence from June 2022.

Druk Metallurgy Ltd (DML)


Druk Metallurgy Ltd (DML) was incorporated on August 30, 2018, as a joint venture foreign direct investment of Druk Holding and Investments Ltd. (DHI) and the Goenka Family, Guwahati, India with a shareholding of 40% and 60% respectively.


DML manufactures mild steel (MS) billets and thermo-mechanically treated (TMT) bars. The phase-I of the project was completed in December 2019 and the works for the phase-II is expected to commence soon. Once commissioned, it will be one of the largest steel manufacturing plants in Bhutan and North Eastern region of India. DML is located at Motonga Industrial Park in Samdrupjongkhar, Bhutan

Azista Bhutan Healthcare Ltd (ABHL)

Azista Bhutan Healthcare Ltd (ABHL) is a joint venture company of Azista Industries Pvt. Ltd. (AIPL), Hyderabad, India and Druk Holding and Investments Ltd. (DHI), Thimphu, Bhutan with shareholding of 72% and 28% respectively.

 

ABHL is a first full-fledged pharmaceutical plant that manufacture, package and distribute wide range allopathic and oncological drugs. The plant is located at Motonga Industrial Park, Samdrup Jongkhar, Bhutan. The construction works are under progress.

Site map
©

Druk Holding & Investments Limited.